Products

Vendor:

Guest On-Board Battery Charger 30A / 12V - 3 Bank - 120V Input [2731A]

On-Board Battery Charger 30A / 12V - 3 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation...

Vendor:

Guest On-Board Battery Charger 40A / 12V - 4 Bank - 120V Input [2740A]

On-Board Battery Charger 40A / 12V - 4 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation...

Vendor:

Guest On-Board Battery Charger 5A / 12V - 1 Bank - 120V Input [2708A]

On-Board Battery Charger 5A / 12V - 1 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation...

Vendor:

Guest On-Board Battery Charger 8A / 12V - 2 Bank - 120V Input [2707A]

On-Board Battery Charger 8A / 12V - 2 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation...

Vendor:

Harken 1 Ton Twing Block [3405]

1 Ton Twing BlockThe Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers...

Vendor:

Harken 10mm Lead Ring [3270]

10mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are...

Vendor:

Harken 12mm Bolt-Down Fairlead - Single [3274]

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for...

Vendor:

Harken 13mm High-Load Trolley w/2X M4 Tapped Holes [IN6707.HL]

13mm High-Load Trolley with 2X M4 Tapped HolesThis trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment,...

Vendor:

Harken 13mm Low Beam Track - 2M [2707.2M]

13mm Low Beam Track - 2MThis track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mounting...

Vendor:

Harken 14mm Lead Ring [3271]

14mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are...

Vendor:

Harken 15 Self-Tailing Radial Aluminum Winch [15STA]

15 Self-Tailing Radial Aluminum WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize...

Vendor:

Harken 16mm Block w/Becket [405]

16mm Block with BecketThe 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls...

Vendor:

Harken 16mm Block w/Swivel [417]

16mm Block with SwivelThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls...

Vendor:

Harken 16mm Block [404]

16mm BlockThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a...

Vendor:

Harken 16mm Double Block w/Becket [407]

16mm Double Block with Becket The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel...

Vendor:

Harken 16mm Double Block [406]

16mm Double BlockThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in...

Vendor:

Harken 16mm Forkhead Block [376]

16mm Forkhead BlockThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in...

Vendor:

Harken 16mm Triple Block w/Becket [409]

16mm Triple Block with BecketThe 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel...

Vendor:

Harken 16mm Triple Block [408]

16mm Triple BlockThe 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in...

Vendor:

Harken 20 Self-Tailing Radial Aluminum Winch [20STA]

20 Self-Tailing Radial Aluminum WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize...

Vendor:

Harken 20 Self-Tailing Radial Chrome Winch [20STC]

20 Self-Tailing Radial Chrome WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize...

Vendor:

Harken 20mm Lead Ring [3272]

20mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are...

Vendor:

Harken 22mm Double Micro Block w/Becket [227]

22mm Double Micro Block with BecketLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 64mm / 2.5in. Weight: 43g / 1.5oz. Maximum line: 6mm / 1/4in. Maximum...

Vendor:

Harken 22mm Double Micro Block [226]

22mm Double Micro BlockLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 51mm / 2in. Weight: 43g / 1.5oz. Maximum line: 6mm / 1/4in. Maximum working load:...