Marine Navigation & Instruments - Transducer Accessories

Vendor:

Lowrance XSONIC Transducer Adapter Cable to HOOK2 [000-14069-001]

XSONIC Transducer Adapter Cable to HOOK²Adapter cable to connect XSONIC Transducer to HOOK² Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 9420024166963

Vendor:

Airmar Humminbird 14-Pin Mix Match Chirp Cable - 1M [MMC-14HB]

Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to...

Vendor:

Lowrance Kayak Scupper Transducer Mount [000-10606-001]

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200...

Vendor:

Airmar MM-9N Mix Match Cable f/Simrad XSONIC Non-CHIRP Transducers [MM-9N]

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable...

Vendor:

Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 60WR-4 Transducer Housing Wrench [60WR-4]

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench...

Vendor:

Furuno 12-Pin XDR Extension Cable - 10M [001-608-450-00]

12-Pin XDR Extension Cable - 10MFeatures: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please...

Vendor:

FORESIGHT Forward-Facing Motorized Sonar Mount [1003]

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling...

Vendor:

Navico TotalScan/StructureScan 3D Replacement Bracket [000-13522-001]

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183...

Vendor:

Lowrance Adapter Cable 7-Pin Blue to Bare Wires [000-10046-001]

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.3 lbs UPC: 042194535111

Vendor:

Raymarine A80328 Adapter Cable [A80328]

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications: Type: Adapters Box Dimensions: 2"H x 9"W x 12"L WT: 0.4 lbs UPC: 723193796351

Vendor:

Attwood Transducer Mounting Plate [94110-5]

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included

Vendor:

Humminbird MHX XNPT Portable Hardware Kit [740090-1]

MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of...

Vendor:

Navico Adapter 7-Pin Blue Transducer to a 9-Pin Black Unit [000-13313-001]

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series...

Vendor:

Garmin Extension Cable w/XID - 12-Pin - 10' [010-11617-32]

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This...

Vendor:

Navico 9-Pin Black to 7-Pin Blue Adapter Cable f/XID Chirp Transducers [000-13977-001]

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersConnects XSONIC Transducers to 7-Pin Blue UnitsUse with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT:...

Vendor:

Garmin Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP CHIRP [010-12445-33]

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional...

Vendor:

Airmar 175WR-4 Transducer Housing Wrench [175WR-4]

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use...

Vendor:

Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Garmin Transom Mount Bracket f/Livescope Plus LVS34 [010-13228-04]

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.

Vendor:

Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using...

Vendor:

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Lowrance HDI Trolling Motor Adapter Cup f/Skimmer XDCR [000-10978-001]

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 8"L WT: 0.2 lbs...