Sailing - Hardware

Vendor:

Ronstan Shock - 3/16" Line - 1/4" Webbing - Grey - Pair [RF8080GRY-2]

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high...

Vendor:

Ronstan C-Cleat Cam Cleat - Medium - Black w/Black Base [RF5410]

C-Cleat Cam Cleat - Medium - Black w/Black Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for...

Vendor:

Ronstan Shock - 3/16" Line - 1/4" Webbing - Red - Pair [RF8080R-2]

Shock - 3/16" Line - 1/4" Webbing - Red - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high...

Vendor:

Barton Single DO 550 Rope Clutch Cruising Racing Max 12mm Line [81500]

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials,...

Vendor:

Barton Triple DO 550 Rope Clutch [81502]

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases...

Vendor:

Barton Marine Drain Plug - Black 15mm (19/32") [42357]

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications: Length: 15mm (19/32") weight: 7gm(.23oz)...

Vendor:

Barton Marine Transom Pintle [42400]

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Vendor:

Harken Micro Carbo-Cam Base w/Bullseye [379]

Micro Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in Maximum...

Vendor:

Ronstan Series 40 High Load Exit Box f/Single Rope & Wire [RF41712]

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications...

Vendor:

C. Sherman Johnson "Captain Hook" Chain Snubber Small Snubber Hook f/1/4" 5/16" Chain w/12 of 1/2" 3 Strand Nylon [46-465]

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different...

Vendor:

C.Sherman Johnson Shroud Cleat [40-518]

Shroud CleatFeatures: All stainless steel construction, compatible with you stainless steel rigging Will not corrode Easily attached to 5/32" thru 3/8" diameter wire or rod Ideal for flag, radar reflector...

Vendor:

C. Sherman Johnson Hinged Pad Eye - 1/4" [48-580]

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the...

Vendor:

C. Sherman Johnson Rigging Tape - White - 1" x 15 [50-115]

Rigging Tape - White - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering...

Vendor:

Schaefer Fast Entry Cam Cleat - Large [70-27]

Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working...

Vendor:

Harken Standard Cam-Matic Aluminum Cleat [150]

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4...

Vendor:

Schaefer Stainless Steel Cleat - 6" [60-150]

Stainless Steel Cleat - 6"6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2" (30mm), Fastener...

Vendor:

Schaefer Furler Pull Back Bracket/Haylard Restrainer - Large [78-75]

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for...

Vendor:

Schaefer Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm [70-17]

Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various...

Vendor:

Schaefer Stanchion Base Single - Heavy-Duty [36-01]

Stanchion Base Single - Heavy-DutyRugged SS Base is canted 5 degrees inboard to match most deck cambers. Features a 5/16" (8mm) welded rod reinforcement which also serves as a bail...

Vendor:

Schaefer Mid-Rail Chock/Cleat Stainless Steel - 1" [70-74]

Mid-Rail Chock/Cleat Stainless SteelSchaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit...

Vendor:

Schaefer Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" [70-75]

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit...

Vendor:

Wichard Asymmetric Carbine Hook - Length 170mm - 15/32" [02328]

Asymmetric Carbine Hook - Length 170mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications...

Vendor:

Ronstan Fairlead - Stainless Steel Lined - 14mm (9/16") ID - Black [RF59]

Fairlead - Stainless Steel Lined - 14mm(9/16") ID - BlackFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners...

Vendor:

Barton Tubular Cleat - 6mm [52120]

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications: Weight: 5g Dimensions: 55mm x 13mm x 14mm Size: 55mm Fastenings: 4mm