Boat Outfitting - Tools

Vendor:

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50 [803950B]

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3...

Vendor:

GROCO Spanner Wrench/Deck Plate Key [SW-2531]

Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes.  Opens to service deck plates or strainer caps with key holes up to 7" apart. ...

Vendor:

Weld Mount 8040 Acrylic Adhesive w/Plunger [804030]

8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto...

Vendor:

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50 [805950]

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for...

Vendor:

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 50 [AT-3-50]

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3...

Vendor:

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our...

Vendor:

Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10 [142016]

1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650...

Vendor:

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50 [805950B]

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for...

Vendor:

Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212]

.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash...

Vendor:

Weld Mount .75" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102412]

.75" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are...

Vendor:

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 100 [805900B]

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for...

Vendor:

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100 [805900]

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for...

Vendor:

Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]

1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash...

Vendor:

Weld Mount AT-113 Large White Footman's Strap - Qty. 6 [80113]

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3"...

Vendor:

Weld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity [102416]

Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps...

Vendor:

Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]

1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash...

Vendor:

Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to...

Vendor:

Weld Mount AT-4020 Acrylic Adhesive - 10-Pack [402010]

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures...

Vendor:

Sea-Dog Rigging Knife - 304 Stainless Steel [565050-1]

Rigging Knife - 304 Stainless SteelThis handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included)....

Vendor:

Sea-Dog Plastic Suction Cup Handle [490050-1]

Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage...

Vendor:

Sea-Dog Add-A-Snap - Black - 2-1/2" [299202B-1]

Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated...

Vendor:

Weld Mount AT-4020 Acrylic Adhesive [4020]

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10...

Vendor:

Panther Portable Rope Cutting Gun [757060B]

Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy...

Vendor:

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100 [803900B]

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3...