Boat Outfitting - Tools

Vendor:

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 100 [805900B]

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for...

Vendor:

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 100 [803900]

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3...

Vendor:

Weld Mount AT-4020 Acrylic Adhesive - 10-Pack [402010]

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures...

Vendor:

Panther Portable Rope Cutting Gun [757060B]

Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy...

Vendor:

GROCO Thru-Hull Installation Tool [THT-530]

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool....

Vendor:

Weld Mount 8040 Acrylic Adhesive w/Plunger [804030]

8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto...

Vendor:

Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212]

.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash...

Vendor:

Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]

1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash...

Vendor:

Weld Mount AT-113 Large White Footman's Strap - Qty. 6 [80113]

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3"...

Vendor:

Weld Mount AT-850 Square Mixing Tip f/2010, 4010, & 8040 Adhesive - 4" case of 50 [8085050]

AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of...

Vendor:

Weld Mount AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives 4" - Case of 10 [80850]

AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's...

Vendor:

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50 [803950B]

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3...

Vendor:

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our...

Vendor:

Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to...

Vendor:

Sea-Dog Add-A-Snap - Black - 2-1/2" [299202B-1]

Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated...

Vendor:

Weld Mount AT-4020 Acrylic Adhesive [4020]

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10...

Vendor:

Digital Yacht J1939 Doctor Diagnostic Tool [ZDIGJDOC]

J1939 Doctor Diagnostic ToolSelf-contained J1939 diagnostics tool with physical network and data analysis on your phone, tablet, PC, or MAC.The J1939 protocol is increasingly being adopted in marine applications, providing...

Vendor:

T-H Marine LED Battery Tester [BE-EL-51004-DP]

LED Battery TesterSpecifically for all 12 Volt DC batteries.

Vendor:

Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500 [805500]

AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic...

Vendor:

Weld Mount AT-113B Large Black Footman's Strap - Qty. 6 [80113B]

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3"...

Vendor:

Weld Mount AT-6031 Metal Bond Adhesive [6031]

AT-6031 Metal Bond AdhesiveAT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes....

Vendor:

Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10 [102424]

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are...

Vendor:

Weld Mount AT-651 Mixing Tips f/Use w/AT-6031 Adhesive - Qty. 10 [85001575]

AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to...

Vendor:

Sea-Dog Add-A-Snap - Black - 1-1/2" [299201B-1]

Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated...