Trailering - Rollers & Brackets

Vendor:

C.E. Smith Trailer Frame Clips - Zinc - 3/8" Wide - 10-Pack [16867A]

Trailer Frame Clips - Zinc - 3/8" Wide - 10-PackAll trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame...

Vendor:

C.E. Smith Carpet Roll - Blue - 11"W x 12'L [11350]

11" Wide x 12' Long Blue Carpet Roll11" wide covers a 2x4 or a 2x6 board Marine grade carpet Weather resistant 100% PET polyester High quality Durable backing Minimal water...

Vendor:

C.E. Smith 3" Bow Bell Roller Assembly - Yellow TPR [29300]

3" Bow Bell Roller Assembly - Yellow TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Yellow TPR 4-1/2" diameter...

Vendor:

C.E. Smith 5' Roller Bunks [27710]

5' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the boat...

Vendor:

C.E. Smith Panel Bracket Assembly 10" Spool Roller - Black [10404G]

Panel Bracket Assembly 10" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8" on center....

Vendor:

C.E. Smith Bow Roller - Yellow PVC - 3" x 1/2" ID [29542]

Bow Roller - Yellow PVC - 3" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes...

Vendor:

C.E. Smith Center Swivel Bracket - 2" [10201G40]

Center Swivel Bracket - 2"Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia....

Vendor:

Megaware ScuffBuster Standard - 5.75" x 4.5" - Solid Bowguard - 22G - Stainless Steel [02637]

ScuffBuster™ Standard - 5.75" x 4.5" - Solid Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™...

Vendor:

Attwood Trailer Bunk Padding 12" x 12 [11247-1]

Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features: 12 inches wide Protects hull  Eases loading and...

Vendor:

C.E. Smith Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" w/Washers Nuts - Square [15253A]

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W...

Vendor:

C.E. Smith Roller Shaft 5/8" x 13" w/Cap Nuts [10727A]

Roller Shaft 5/8" x 13" with Cap NutsReplacement Roller shaft and cap nuts.Features: 5/8" diameter x 13" long Zinc Plated Comes with two 5/8" cap nuts

Vendor:

C.E. Smith Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" w/Washers Nuts - Square [15252A]

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W...

Vendor:

C.E. Smith Swivel Bracket Assembly - 8" Bracket [10000G]

Swivel Bracket Assembly - 8" BracketThis Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.This bracket assembly uses...

Vendor:

C.E. Smith 8"-5/8" Keel Roller Black Natural Rubber [29502]

8"-5/8" Keel Roller Black Natural RubberBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 3-3/8" Diameter 7-7/8" wide 5/8" shaft...

Vendor:

C.E. Smith Swivel Bracket Kit [10205GA]

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8"...

Vendor:

Megaware Grip Guard Comfort Grip [51502]

Grip Guard Comfort GripFeatures: Guard Against Slips & Falls Foot-Friendly PEVA Grip System Anti-Slip Safety Tape Acrylic Waterproof Pressure Sensitive Adhesive Heavy-Duty Grade Easily Trimmable (2) 15" x 5" Grip...

Vendor:

C.E. Smith Vertical 90 Bunk Bracket - 5" x 10" - Aluminum [10162A40]

Vertical 90° Bunk Bracket - 5" x 10" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry...

Vendor:

C.E. Smith Package Roller Shaft 1/2" x 5-1/4" w/Cap Nuts - Zinc [10700A]

Package Roller Shaft 1/2" x 5-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 5-1/4" Max Grip: 4.690"

Vendor:

C.E. Smith Package Roller Shaft 1/2" x 6-1/4" w/Cap Nuts - Zinc [10701A]

Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 6-1/4" Max Grip: 5.690"

Vendor:

C.E. Smith Chrome Acorn Wheel Nuts - 1/2"-20 [16720A]

Chrome Acorn Wheel Nuts - 1/2"-20The most commonly used wheel mounting hardware.Packaged 5 per blister pack.

Vendor:

C.E. Smith Vertical 90 Bunk Bracket - 5" x 6" - Aluminum [10160A40]

Vertical 90° Bunk Bracket - 5" x 6" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry...

Vendor:

C.E. Smith Cap Nut - 1/2" 8 Pieces Zinc [10800A]

Cap Nut - 1/2" 8 Pieces ZincCap nuts are hammered on each end of roller shafts to create a long lasting solid connection.Features: Zinc plated 1/2" 8 per package

Vendor:

C.E. Smith Package Roller Shaft 1/2" x 12-3/4" w/Cap Nuts - Zinc [10705A]

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 12-3/4" Max Grip: 12.190"

Vendor:

C.E. Smith Bow Roller - Yellow PVC - 4" x 1/2" ID [29543]

Bow Roller - Yellow PVC - 4" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes...