Marine Navigation & Instruments - Transducer Accessories

Vendor:

Airmar Mix Match Cable f/Raymarine 600W Non-CHIRP Transducers - 9m [MM-RAY]

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an...

Vendor:

Airmar Furuno 10-Pin Mix Match Cable f/High or Medium Frequency CHIRP Transducers [MMC-10F-HM]

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original...

Vendor:

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For...

Vendor:

Furuno 10-Pin to 12-Pin Adapter Cable (0.4m) f/TZT3 [000-197-069-10]

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of...

Vendor:

Garmin 8-Pin Transducer to 4-Pin Sounder Adapter Cable [010-12719-00]

8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.Compatible Devices: STRIKER™ 4 STRIKER™ 4 Portable...

Vendor:

Lowrance Kayak Scupper Transducer Mount [000-10606-001]

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200...

Vendor:

Lowrance TripleShot Transom Mount Bracket [000-14193-001]

TripleShot Transom Mount BracketTransom mount bracket for TripleShot Transducer Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 9420024168387

Vendor:

Lowrance Bullet/SplitShot Transom Mount Bracket [000-14192-001]

Bullet/SplitShot Transom Mount BracketTransom mount bracket for Bullet & SplitShot Transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 9420024168370

Vendor:

Lowrance 7-Pin Transducer Adapter Cable to HOOK2 [000-14068-001]

7-Pin Transducer Adapter Cable to HOOK²This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2...

Vendor:

Navico Adapter 7-Pin Blue Transducer to a 9-Pin Black Unit [000-13313-001]

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series...

Vendor:

Lowrance 83/200 Skimming Transducer SS Mounting Kit [000-0099-06]

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

Vendor:

Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this...

Vendor:

Airmar 75WR-4 Transducer Housing Wrench [75WR-4]

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use...

Vendor:

Furuno AIR-033-333 Transducer Pigtail [AIR-033-333]

Transducer Pigtail, 10-Pin(F), 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For...

Vendor:

Garmin Trolling Motor Shaft Mount f/Panoptix LVS32 [010-12784-01]

Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those...

Vendor:

Garmin 8-Pin Female to Wire Block Adapter f/echoMAP 50s 70s, GPSMAP 4xx, 5xx 7xx, GSD 24 [010-11613-00]

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you...

Vendor:

Airmar Garmin 12-Pin Mix Match Cable f/Chirp Transducers [MMC-12G]

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of...

Vendor:

Airmar Furuno 10-Pin Mix Match Cable f/600W Non-CHIRP Transducers [MM-10FUR]

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable...

Vendor:

Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using...

Vendor:

Garmin 4-Pin Transducer to 8-Pin Sonar Port [010-12721-00]

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals...

Vendor:

Garmin Suction Cup Transducer Adapter [010-10253-00]

Suction Cup Transducer AdapterUsing your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product...