Products

Vendor:

Actisense Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Female [A2K-PMW-F]

Rear Panel Mount NMEA2000 Wired Micro 5-Pin - FemalePanel-mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity...

Vendor:

Actisense Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Male [A2K-PMW-M]

Rear Panel Mount NMEA2000 Wired Micro 5-Pin - MalePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the...

Vendor:

Actisense RJ45 Waterproof Ethernet Connector f/NDC-5 [RJ45-FFC]

RJ45 Waterproof Ethernet Connector for NDC-5RJ45 Field-Fit Ethernet connector.Allows for complete customization of Ethernet network cabling lengths, reducing cost, waste, and the overall weight of your boat.This product may not...

Vendor:

Actisense SeaTalkNG to NMEA2000 Adapter Cable [STNG-A06045]

SeaTalkNG to NMEA2000 Adapter CableAdapter cable to convert SeaTalkNG data to NMEA2000.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

Vendor:

Actisense Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators Power Feed [A2K-SBN-2]

Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power FeedInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network...

Vendor:

Actisense Spare Shielded Cable f/Connecting USB-2 to PC [USG-2CABLE]

Spare Shielded Cable for Connecting USB-2 to PCUSB cable accessory for use with the Actisense USG-2.*Note: The USG-2 ships with this cable included in the box, but it is also...

Vendor:

Actisense Universal Strain Relief Bracket [A-SRB-90]

Universal Strain Relief BracketThis strong stainless steel strain relief bracket ensures neat installation and tidy cables by securing any loose cables directly to the bulkhead.Perfect for the installation of the...

Vendor:

Actisense USB to Serial Adapter f/PRO Range EMU-1 Products [USBKIT-PRO]

USB to Serial Adapter for PRO Range & EMU-1 ProductsSerial to USB cable assembly.*Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA...

Vendor:

Actisense USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 and RS232 [USG-2]

USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 And RS232The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network.The USG-2 converts a USB...

Vendor:

Aigean 7 Source Programmable Multi-WAN Router (Rackmountable) [MFR-7]

Multi-WAN 7 Source Gigabit Router (Rackmountable) GB Ethernet 110/220VAC PowerAigean’s Multi-WAN routers enable networks to switch between multiple internet sources without adversely affecting the onboard local network. Coupled with advanced...

Vendor:

Airmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can...

Vendor:

Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this...

Vendor:

Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 117WR-4 Transducer Housing Wrench [117WR-4]

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For...

Vendor:

Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For...

Vendor:

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 175WR-4 Transducer Housing Wrench [175WR-4]

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use...

Vendor:

Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]

Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a...

Vendor:

Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using...

Vendor:

Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...

Vendor:

Airmar 60WR-4 Transducer Housing Wrench [60WR-4]

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench...