Automotive/RV - Compasses - Magnetic

Vendor:

C.E. Smith Pontoon Square Rail Adjustable Clamp-On Rod Holder [55108A]

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on...

Vendor:

C.E. Smith License Plate Bracket [26053A]

License Plate BracketUpgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing...

Vendor:

C.E. Smith Tail Light Protector [26051A]

Tail Light ProtectorAdded protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard...

Vendor:

C.E. Smith 4" Bow Bell Roller Assembly - Blue TPR [29331]

4" Bow Bell Roller Assembly - Blue TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Blue TPR 5-1/2" diameter...

Vendor:

C.E. Smith 3" Bow Bell Roller Assembly - Blue TPR [29330]

3" Bow Bell Roller Assembly - Blue TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Blue TPR 4-1/2" diameter...

Vendor:

C.E. Smith 3" Bow Bell Roller Assembly - Yellow TPR [29300]

3" Bow Bell Roller Assembly - Yellow TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Yellow TPR 4-1/2" diameter...

Vendor:

C.E. Smith Jon Boat Support Bunk & Bracket Assembly [27850]

Jon Boat Support Bunk & Bracket Assembly24" carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2" up to 8"...

Vendor:

C.E. Smith Axle Tie Plate Kit f/1-1/2" Square Axle [23102]

Axle Tie Plate Kit f/1-1/2" Square AxleThis kit has everything you need to mount fresh springs to a fresh springs to a fresh axle.Includes: 2 galvanized tie plates 4 yellow...

Vendor:

C.E. Smith Spindle Nut Kit [11065A]

Spindle NutsReplacement spindle nuts for 1" axle shaft.Includes: Two 1" shaft spindle nuts Two 1" shaft washers Two 1-3/4" long cotter pins Sold in pairs.

Vendor:

Raymarine ECI-100 Universal Engine & Control Interface [E70227]

ECI-100 Universal Engine & Control InterfaceThe ECI-100 Universal Engine and Control Interface is an innovative and affordable solution for bridging engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation...

Vendor:

ACR Firefly PRO WATERBUG SOLAS [3971.3]

FireFly® PRO WATERBUG SOLASThe Firefly® PRO WATERBUG is a SOLAS-approved strobe light with a built-in water activation feature that will automatically activate once submerged.  With four (4) activation functions, toggle...

Vendor:

Flitz Instant Brass & Copper Tarnish Remover - 1 Gallon [BC 01810]

Instant Brass & Copper Tarnish RemoverNatural Organic salts formula Instantly Removes heavy tarnish without rubbing. Safer than traditional acid-based cleaners. Just spray & rinse. Use Indoors or Out.Instantly removes:Heavy tarnish,...

Vendor:

Flitz Instant Brass & Copper Tarnish Remover - 16. oz Spray [BC 01806]

Instant Brass & Copper Tarnish RemoverNatural Organic salts formula Instantly Removes heavy tarnish without rubbing. Safer than traditional acid-based cleaners. Just spray & rinse. Use Indoors or Out.Instantly removes:Heavy tarnish,...

Vendor:

Standard Horizon DC Cable w/Cigarette Lighter Plug f/All Hand Helds Except HX400 [E-DC-19A]

DC Charger Cable with Cigarette Lighter Adapter*Works with all Hand Helds except for the HX400 & HX400IS*May Require Charging Cradle Sold Separately Specifications: Type: Chargers Box Dimensions: 1"H x 3"W...

Vendor:

Standard Horizon Battery Tray f/HX300 [FBA-44]

Alkaline Battery TrayCompatible w/HX300 Specifications: Type: Batteries Box Dimensions: 1"H x 2"W x 2"L WT: 0.03 lbs UPC: 788026130108

Vendor:

Standard Horizon SMA to BNC adapter [CN-3]

SMA to BNC AdapterAntenna Adapter used to convert the SMA connector found on all Standard Horizon Hand Helds to BNC. Specifications: Type: Misc Box Dimensions: 1"H x 2"W x 2"L...

Vendor:

Raymarine Wind Vane & Cups [A28167]

Wind Vane & CupsCompatible Devices: Raymarine ST60 ST60+ i60 ST290 Egg-Shape Masthead Transducers

Vendor:

Camco Premium Drinking Water Hose - " ID - Anti-Kink - 25' [22833]

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features...

Vendor:

TACO Flexible Vinyl Trim - 1/2" Opening x "W x 25'L - Black [V30-1316B25-1]

Flex TrimLength: 25'"A": 1/2""B": 5/8"Color: BlackTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide...

Vendor:

TACO Flexible Vinyl Trim - 1/4" Opening x 1/2"W x 25'L - White [V30-1008W25-1]

Flex TrimFeatures: Length: 25' "A": 1/4" "B": 1/2" Color: White TACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim &...

Vendor:

TACO Weather Seal - 10'L x 1/2"W x 1/2"H - Black [V30-0202B10-1]

Weather SealLength: 10'Height: 1/2"Width: 1/2"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior...

Vendor:

TACO Weather Seal - 10'L x 1/4"H x 3/8"W - Black [V30-1333B10-1]

Weather SealLength: 10'Height: 1/4"Width: 3/8"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior...

Vendor:

TACO Grand Slam 170 Center Rigger 1-" OD [GS-170-2]

Grand Slam 170-2 Center Mount Uses TACO's spline lock technology for secure outrigger elevation Designed for use with standard 1-1/8" butt OD outriggers Locks every 18° Derlin bearings and stainless...

Vendor:

TACO Grand Slam 280 Outrigger Mounts w/Offset Handle [GS-2801]

Grand Slam 2801 Outrigger Top MountThe GS-2801 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable...