Boat Outfitting

Vendor:

Dometic VX250 Cold Machine Flat Roll-Bond Evaporator Plate f/Volumes Up to 250L [9630000222]

VX250 Cold Machine Flat Roll-Bond Evaporator Plate for Volumes Up to 250LDesigned for flexibility and performance, the Dometic VX series evaporators bring precise, even cooling to any custom box configuration....

Vendor:

NavPod StarPod Mini System w/StarTower f/Starlink Mini Dish (11.75 x 10.2 Dish Size) *Starlink Dish Not Included [SPS1000]

StarPod Mini System with StarTower for Starlink Mini Dish (11.75 x 10.2″ Dish Size) *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution...

Vendor:

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100 [803900B]

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3...

Vendor:

Scanstrut PT3010 Base Wedge f/PowerTower Radar Mounts - 4 [PT3010]

PT3010 Base Wedge f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide...

Vendor:

Bob's Machine Deck Plug - Pedestal Seat Plug 0.75" Hole- Black [311-000002-PCGBLK]

Deck Plug - Pedestal Seat Plug 0.75" Hole- BlackFeatures: Bob’s Pedestal Seat plug fills the hole when your seat is not in use Patent pending water tight system! O-ring sealed...

Vendor:

Bob's Machine Prop Dock Kit w/Wrench [398-200000]

Prop Dock Kit with WrenchNow you can mount your prop securely in your boat with our patent pending BSA Prop Dock! No more having your expensive prop loose in your...

Vendor:

Bob's Machine MFD Bow Graph Mount w/Tool Caddy [110-600400]

MFD Bow Graph Mount with Tool CaddyFeatures: Black Anodized finish Tool caddy that can be swapped from right to left side

Vendor:

Bob's Machine Transom/Engine 6.5" Bolt Kit *Set of 6 [110-114006A]

Transom/Engine 6.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″...

Vendor:

Bob's Machine Transom/Engine 5.5" Bolt Kit *Set of 6 [110-114005A]

Transom/Engine 5.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″...

Vendor:

Bob's Machine 4" Setback Action Series Hydraulic Jack Plate - Silver [100-104101-NOPC-NOSPN-NG]

4" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to...

Vendor:

Bob's Machine Transom/Engine 4" Bolt Kit *Set of 6 [110-114004]

Transom/Engine 4" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″...

Vendor:

Bob's Machine 8" Setback Action Series Hydraulic Jack Plate - Silver [100-108001-NOPC-NOSPN-NG]

8" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to...

Vendor:

Bob's Machine Transom/Engine 7" Bolt Kit *Set of 6 [110-114007]

Transom/Engine 7" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″...

Vendor:

Bob's Machine 6 Hydraulic Action Series Kick-Back Jac - Silver [100-105100-NOPC]

6″ Hydraulic Action Series Kick-Back Jac - SilverThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac!  Bob’s jack plate with 6″ hydraulic stroke...

Vendor:

Bob's Machine 4 Hydraulic Action Series Kick-Back Jac - Silver [100-105102-NOPC]

4″ Hydraulic Action Series Kick-Back Jac - SilverThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with 6″ hydraulic stroke...

Vendor:

Bob's Machine 4 Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss Black [100-105102P-PCGBLK]

4″ Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss BlackThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with...

Vendor:

Bob's Machine MFD Bow Graph Mount [110-600000]

MFD Bow Graph MountSpecifications: Black anodized finish Mount

Vendor:

Bob's Machine Pro Series Aluminum Blinker Switch - Dual [305-340000AL]

Pro Series Aluminum Blinker Switch - DualFeatures: Steering wheel switch - Dual Keep your hands on the steering wheel with this switch. Performance like a blinker switch in a car....

Vendor:

Bob's Machine Kicker Jac - Up to 40HP 4-Stroke Motors - Silver [100-300000-NOPC]

Kicker Jac - Up to 40HP 4-Stroke Motors - SilverWith a maximum engine rating of 40 hp, BMS’s hydraulic kicker jack plate provides slow-speed power for cruisers, auxiliary power for...

Vendor:

Bob's Machine 6" Setback Action Series Hydraulic Jack Plate - Gloss Black [100-106010P-PCGBLK-NOSPN-NG]

6" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate...

Vendor:

Bob's Machine 6" Fixed Setback Brackets w/1.5" Built-In Lift - Silver [100-406000-NOPC]

6" Fixed Setback Brackets with 1.5" Built-In Lift - SilverSetback brackets re-position the motor into cleaner water to increase propeller efficiency and minimize prop slippage. Drag is reduced and the...

Vendor:

Bob's Machine 6 Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss Black [100-105100P-PCGBLK]

6″ Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss BlackThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with...

Vendor:

Bob's Machine Transom/Engine 2" Bolt Kit *Set of 6 [110-114002]

Transom/Engine 2" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″...

Vendor:

Bob's Machine NMEA Connector Kit w/o Guage (Only view On Graph) [110-400003]

NMEA Connector Kit without Guage (Only view On Graph)Garmin, Humminbird, Navico (Simrad/Lowrance) and Raymarine compatable. Please make sure to check your units compatibility and software version to make sure Jack...