Electrical - Busbars, Connectors & Insulators

Vendor:

Blue Sea 2604 Terminal Block 65AMP - 4 Circuit [2604]

2604 Terminal Block 65AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits...

Vendor:

BEP Pro Installer Link Joiner 2-Way [779-LBJ-2]

Pro Installer Link Joiner 2-WayThis tin-plated bus bar can be used to link 2 adjacent DC products together.  The rating is 650 Amps, and it can be doubled up if...

Vendor:

T-Spec VDB2 2-Position Distribution Block w/Cover [VDB2]

VDB2 2-Position Distribution Block with CoverT-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking...

Vendor:

T-Spec VFDB4 MANL 4 Position Distribution Block w/Cover [VFDB4]

VFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires,...

Vendor:

Blue Sea 2307 Common 150A BusBar - (4) 1/4"-20 Studs w/Cover [2307]

2307 Common 150A BusBar - (4) 1/4"-20 Studs w/CoverFeatures: The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications:...

Vendor:

Blue Sea 5503 ANL 750 Fuse Block w/ Cover [5503]

5503 Cover included Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel...

Vendor:

Blue Sea 2105 MaxiBus 250AMP Common BusBars 12 x #10 Terminal Screws [2105]

2105 MaxiBus 250AMP Common BusBars 12 x #10 Terminal ScrewsBusbars are used to consolidate multiple wires or feed multiple circuits.Features: Insert molded stainless steel studs eliminate need for securing nut...

Vendor:

Blue Sea 2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud Terminal [2107]

2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud TerminalSpecifications: Maximum Voltage: 300 V AC/48V DC Number of Terminal Studs: 8 Terminal Type: 3/8" - 16 Stud WARNING:...

Vendor:

Egis 3 Hole L Shaped Busbar Connector [8793]

3 Hole L Shaped Busbar ConnectorLink Together XD Single, Dual, and Triple XD Relays to multiple sealed fuse blocks or link fuse blocks together for compact installation.Tin-Plated Copper to ensure...

Vendor:

Egis 4 Hole Quad Shaped Busbar Connector [8794]

4 Hole Quad Shaped Busbar ConnectorLink Together XD Single, Dual, and Triple XD Relays to multiple sealed fuse blocks or link fuse blocks together for compact installation.Tin-Plated Copper to ensure...

Vendor:

BEP Pro Installer 4-Way Link Bar/Joiner [779-LBJ-4]

Pro Installer Link Joinder 4-WayThis tin-plated bus bar can be used to link 4 adjacent DC products together.  The rating varies from 450-650 Amps, depending on how this busbar is...

Vendor:

BEP Pro Installer Link Joiner 6-Way [779-LBJ-6]

Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together.  The rating varies from 350-650 Amps depending on how this busbar is...

Vendor:

BEP Pro Installer Link Joiner 5-Way [779-LBJ-5]

Pro Installer Link Joiner 5-WayThis tin-plated bus bar can be used to link 5 adjacent DC products together.  The rating varies from 400-650 Amps depending on how this busbar is...

Vendor:

Egis RT Screw Terminal 12 Circuit Dual Lever Bus Bar [8030]

RT Screw Terminal 12 Circuit Dual Lever Bus BarThis Egis bus bar seamlessly integrates with RT fuse blocks, can be used as a standalone ground bus, or can be assembled...

Vendor:

Egis XD Relay Cross-Over Bus Bar [8791]

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each other in multiple configurations and...

Vendor:

Newmar BB-5 Bus Bar [BB-5]

BB-5 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick...

Vendor:

Newmar BB-2 Bus Bar [BB-2]

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick...

Vendor:

Newmar BB-8 Bus Bar [BB-8]

BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick...

Vendor:

Newmar BB-2/8 Bus Bar [BB-2/8]

BB-2/8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. centers in 1/4 in. thick...

Vendor:

Sea-Dog Buss Bar w/Cover - 6 Terminals [426692-3]

Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated...

Vendor:

Sea-Dog Dual Buss Bar w/Cover - 12 Terminals [426693-3]

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on...

Vendor:

Pacer 16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 100 Pack [TE14-10R-100]

16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 100 PackRing terminals are used to connect wires to a connection point. They can easily be used with two...

Vendor:

Pacer 12-10 AWG Heat Shrink Butt Connector - 100 Pack [TBSE10-100]

12-10 AWG Heat Shrink Butt Connector - 100 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to...

Vendor:

Blue Sea 2356100 - Water Resistant 100A Busbar w/Cover [2356100]

2356100 - Water Resistant 100A Busbar with CoverWater-resistant bussing for harsh environments.  Built with wing screws for toolless access.Features:Accepts a wide range of wire sizes Includes 3 wire plugs to...