Engine Parts & Service

Vendor:

Trident Marine 6" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow w/4 T-Bolt Clamps [TRL-645-S/S]

6" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore...

Vendor:

Trident Marine 316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19" Range [720-8000L]

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19"  RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4"...

Vendor:

Trident Marine 316 SS T-Bolt Clamp - 3/4" Band - 6.53"-7.10" Range [720-6000L]

316 SS T-Bolt Clamp - 3/4" Band - 6.53"-7.10" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4"...

Vendor:

Trident Marine 6" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow w/4 T-Bolt Clamps [290V6000-S/S]

6" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber...

Vendor:

Trident Marine 1-1/4" x 50 Coil Flex Marine Wet Exhaust Water Hose - Black [100-1146]

1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain,...

Vendor:

Trident Marine 3/8" x 50 Boxed Low Permeation Type A1-15 Fuel Line Hose - Black [365-0386]

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including...

Vendor:

Trident Marine 5/8" x 50 Boxed Type A2 Fuel Vent Line Hose - Black [317-0586]

5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - BlackTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends)....

Vendor:

Trident Marine 1" x 50 Coil Flex Marine Wet Exhaust Water Hose - Black [100-1006]

1" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain,...

Vendor:

Attwood Johnson/Evinrude/OMC Female Hose Fitting - Tank Or Engine End - 3/8" Barb [8889LP6]

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The...

Vendor:

ARCO Marine IG023 Ignition Coil Assembly f/Yamaha Outboard Engines [IG023]

IG023 Ignition Coil Assembly for Yamaha Outboard EnginesThis ARCO ignition coil assembly is designed for specific Yamaha outboard engines.Fits:Yamaha 9.9HP 15HP 2-Stroke 1996-2009 Outboard EnginesReplaces: YAMAHA Ignition Coil Assy 63V-85570-00-00...

Vendor:

ARCO Marine Premium Replacement Alternator w/Multi-Groove Serpentine Pulley - 12V 65A [60060]

Premium Replacement Alternator with Multi-Groove Serpentine Pulley - 12V & 65AReplacement alternator that will fit late model Mercruiser, 12 Volt, 65 Amp, Internal Regulator 2-inch mounting foot, Multi-groove serpentine pulley...

Vendor:

ARCO Marine Premium Replacement Ignition Coil f/Mercury Outboard Engines 2004-2018 [IG005]

Premium Replacement Ignition Coil for Mercury Outboard Engines 2004-2018This ignition coil fits 2004-2018 (75,80,90,100,115,135,150,200,225,250,275,300,350 & 400HP) Mercury outboard engines.Replaces: MERCURY Ignition Coil 339-880615T01 SIERRA Ignition Coil 18-5154 CDI Electronics Ignition...

Vendor:

ARCO Marine Mercruiser Tilt Trim Reservoir Kit - 4 Screw Mount [M532]

Mercruiser Tilt Trim Reservoir Kit - 4 Screw MountTilt trim reservoir kit that will fit Arco 6275 Tilt Motor 4 screw mount. Replaces Mercruiser.Replaces:Mercruiser 883166A2*ARCO Assurance 12-month part and labor...

Vendor:

ARCO Marine Premium Replacement Alternator w/Multi-Groove Pulley - 12V 55A [60055]

Premium Replacement Alternator with Multi-Groove Pulley - 12V 55AReplacement alternator that will fit late model Mercruiser, 12 Volt, 55 Amp, Internal regulator 2-inch mounting foot, multi-groove serpentine pulley included.Features: All...

Vendor:

ARCO Marine High-Performance Inboard Starter w/Gear Reduction Permanent Magnet - Clockwise Rotation [70200]

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise RotationThe inboard starter includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery -...

Vendor:

ARCO Marine Replacement Alternator f/Mercury Engines - 135 150 HP [20851]

Replacement Alternator for Mercury Engines - 135 & 150 HPReplacement alternator that will fit Mercury Outboard Engines 135 HP - 150 HP, 12 Volt, 55 AMP, 4 grooves, pulley included. Features: All...

Vendor:

ARCO Marine Premium Replacement Outboard Alternator w/Multi-Groove Pulley - 12V 50A [20850]

Premium Replacement Outboard Alternator with Multi-Groove Pulley - 12V 50AReplacement alternator that will fit 1.5L & 3.0L Mercury Outboard, 12 Volt, 50 AMP, Internal Fan, Multi-groove serpentine pulley included, Includes...

Vendor:

Trident Marine 3-1/2" x 36" Blue Silicone Wet Exhaust Hose [202V3120-36]

3-1/2" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last...

Vendor:

Attwood Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb [88FBMA102-6]

Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" BarbThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel...

Vendor:

Attwood 3/8" Hose Mender In-Line Fuel Splice Kit w/SS Clamps [11822-6]

3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides...

Vendor:

Attwood Chrysler Female Hose Fitting - 3/8" Barb [8884-6]

Chrysler Female Hose Fitting - 3/8" BarbThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel...

Vendor:

Attwood Honda Tank Fitting - 1/4" NPT Thread - 90HP+ [8901-6]

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male...

Vendor:

Regitar USA Marine Fuel Pump Assembly f/Volvo Penta: 4.3L Through 5.7G1 Engines [RFP001]

Marine Fuel Pump Assembly for Volvo Penta: 4.3L Through 5.7G1 EnginesFuel Pump Assembly for Volvo Penta: 4.3L through 5.7G1 engines.Engine Brand:Volvo PentaFitment: 4.3L  4.3GXi 4.3OSi 5.0L 5.0GXi 5.0OSi 5.7L 5.7OSXi...

Vendor:

Regitar USA Rotor f/Mercruiser: 2001 Newer MCM/MIE 4.3L, 5.0L, 5.7L 6.2L MPI Engines w/ECM 555 [RMN010]

Rotor for Mercruiser: 2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines with ECM 555Rotor for Mercruiser: 2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines...