Marine Hardware

Vendor:

Whitecap Teak Utility Hook [62560]

Utility Hook 7"H x 3-3/4"W x 7/8"D Sturdy hook holds clothing, hats or gear

Vendor:

Whitecap Teak Outlet Cover/Receptacle Plate [60170]

Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Vendor:

Whitecap Teak Handrail - 2 Loops - 23"L [60102]

Solid Teak Handrails Two-Loop Handrail 23"L x 2-3/8"H x 1"D

Vendor:

Whitecap Teak Two-Rod Storage Rack - Pair [60610]

Teak Two-Rod Storage Rack 8-1/2"L x 2-7/8"H x 3/4"D Sold in pairs

Vendor:

Whitecap Teak Navigation Rack [62532]

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Vendor:

Whitecap Teak Liquid Soap Holder [62316]

Liquid Soap Holder Holds 10-1/2oz oval bottle 3-3/4"W x 2-3/4"D x 4-3/8"H

Vendor:

Whitecap Teak Lock-In Four-Rod Storage Rack [60620]

Teak Lock-In Four-Rod Storage Rack Stainless steel and brass hardware 24"L x 1-3/16"H x 3-5/8"D

Vendor:

Perko Gas Tank Vent w/Splash Guard - Chrome Plated Zinc - " Hose [0506DP4CHR]

Gas Tank Vent Chrome Plated Zinc Alloy with Black Polymer Splash Guard Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications Hose Size: 5/8"...

Vendor:

Whitecap Teak Louvered Door & Frame - Right Hand - 15" x 20" [60724]

Louvered Door & FrameCutout: 14" x 19"Right Hand Opening

Vendor:

Whitecap Teak Louvered Door & Frame - Right Hand - 12" x 12" [60720]

Louvered Door & FrameCutout: 11" x 11"Right Hand Opening

Vendor:

Whitecap Teak Lumber - 7/8" x 4" x 36" [60818]

Teak Marine LumberThickness: 7/8"Width: 4"Length:36"

Vendor:

Whitecap Teak Round Drawer Pull - 1-3/8" Round - 2 Pack [60127-A]

Round Drawer Pull 1-3/8" Round Recess Mount, 3/8" Deep 2-Pack

Vendor:

Whitecap Teak Grate Top Fold-Away Table [60030]

Grate Top Fold-Away Table Solid brass hardware Open: 17-3/4" square x 18-1/2"H Closed: 17-3/4"W x 23"H x 2-3/4"D Quick set-up and folds for storage Oiled finish

Vendor:

Whitecap Teak Louvered Insert - 6-3/8" x 11-3/16" x 3/4" [60714]

Teak Louvered InsertHeight:6-3/8"Width:11-3/16"Depth:3/4"Cut OutHeight:5-3/8"Width:10-3/16"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch...

Vendor:

Whitecap Teak Handrail - 4 Loops - 43"L [60106]

Solid Teak Handrails Four-Loop Handrail 43"L x 2-3/8"H x 1"D

Vendor:

Whitecap Teak Toilet Tissue Rack [62322]

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Vendor:

Whitecap Teak Louvered Insert - 7-1/2" x 9-1/8" x 3/4" [60712]

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch...

Vendor:

Whitecap Teak Oval Drawer Pull - 4"L - 2 Pack [60147-A]

Oval Drawer Pull 4" Length Surface Mount 2-Pack with hardware

Vendor:

Whitecap Teak Wall-Mount Paper Towel Holder [62442]

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Vendor:

Perko Spring Loaded Flush Pull - Chrome Plated Zinc - " x 3-1/4" [1221DP0CHR]

Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically

Vendor:

PSS Shaft Seal 2" Shaft 3-1/4" Tube [02-200-314]

PSS Shaft Seal 2" Shaft 3-1/4" TubeShaft Diameter: 2"Stern Tube Diameter (D): 3-1/4" to 3-3/8"Total Length (A): 9.175"Total Length (compressed) (Compressed A): 8.175"Rotor Diameter (B): 3.75"Carbon Cuff Diameter (C): 3.25"Stern...

Vendor:

Whitecap Teak Ground Fault Outlet Cover/Receptacle Plate [60171]

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Vendor:

Whitecap Teak Handrail - 6 Loops - 63"L [60110]

Solid Teak Handrails Six-Loop Handrail 63"L x 2-3/8"H x 1"D

Vendor:

Whitecap Teak Louvered Insert - 9-3/8" x 18" x 3/4" [60716]

Teak Louvered InsertHeight:9-3/8"Width:18"Depth:3/4"Cut OutHeight:8-3/8"Width:17"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch...