Marine Navigation & Instruments - NMEA Cables & Sensors

Vendor:

Raymarine SeaTalkng 5-Way Connector [A06064]

5-way SeaTalkng Connector used for connecting spurs to the backbone.

Vendor:

Raymarine Devicenet Male ADP Cable SeaTalkng to NMEA 2000 [A06046]

Devicenet Male ADP Cable SeaTalkng to NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Male: 1.5M cable Specifications: Connection Gender:...

Vendor:

Raymarine 3M Backbone Cable f/SeaTalkng [A06035]

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on...

Vendor:

Furuno Analog - NMEA2000 Converter [IF-NMEAFI]

Analog - NMEA2000 ConverterThis unit converts analog data from an external sensor to the CAN bus format data.This product may not be returned to the original point of purchase. Please...

Vendor:

Digital Yacht iKonvert NMEA 2000 Gateway w/ISO Interface [ZDIGIKVT]

iKonvert NMEA 2000 Gateway with ISO InterfaceThe iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional,...

Vendor:

Bluewater NMEA 2000 T-Connector [2702-12-012]

NMEA 2000 T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000...

Vendor:

Lowrance N2KEXT-15RD 15 NMEA 2000 Cable [119-86]

N2KEXT-15RD 15' NMEA 2000 Cable15' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Connection Gender: Male-Female Cable Length (Meters): 4.5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 7"W...

Vendor:

Raymarine SeaTalkng Backbone Extender [A06030]

SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.

Vendor:

Raymarine 400MM Elbow Spur Cable f/SeaTalkng [A06042]

Spur CableRaymarine 400MM elbow Spur Cable for SeaTalkng Specifications: Cable Length (Meters): 400mm Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 723193060421

Vendor:

Bluewater NMEA 2000 Male Terminator - 120 ohm [2705-00-001]

NMEA 2000 Male Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive...

Vendor:

Garmin GFL 10 Fluid Level NMEA 2000 Analog Adapter [010-11326-00]

The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters...

Vendor:

Lowrance N2KEXT-2RD 2 NMEA 2000 Cable [119-88]

N2KEXT-2RD 2' NMEA 2000 Cable2' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Connection Gender: Male-Female Cable Length (Meters): 0.6m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 2"H x 4"W...

Vendor:

Bluewater NMEA 2000 Female Terminator - 120 ohm [2705-00-010]

NMEA 2000 Female Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive...

Vendor:

Maretron MS-1085-N Rectangular Magnetic Switch f/Outdoor [MS-1085-N]

MS-1085-N Rectangular Magnetic Switch for OutdoorsApplications: Convenient surface mounting Mounting screws included Specifications: ABS Plastic Enclosure IP67 Hermetically sealed reed switch encapsulated in polyurethane WARNING: This product can expose you...

Vendor:

Garmin NMEA 2000 T Connector [010-11078-00]

NMEA 2000 T ConnectorWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

Vendor:

Maretron TMP100 Temperature Module [TMP100-01]

Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2...

Vendor:

Maretron Mid Double-Ended Cordset - 0.5 Meter - Gray [DM-DG1-DF-00.5]

Maretron Mid Double-Ended Cordset - 0.5M GrayMechanical: Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59"Electrical Current Rating:...

Vendor:

Raymarine In-Line SeaTalkNG Terminator [A06074]

Raymarine In-Line TerminatorIn-Line SeaTalkng Terminator f/Long Cable Runsold part number a80001 , now its a06074 Specifications: NMEA 2000 Connectors: Terminators Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs...

Vendor:

Raymarine SeaTalkng T-Piece Connector [A06028]

SeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables.

Vendor:

Maretron Fuel Flow Sensor - 2-100 LPH [M1AR]

Fuel Flow Sensor - 2-100 LPHFeatures: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with...

Vendor:

Actisense Protective Screw Cover f/NMEA2000 Female Micro Connectors - 10-Pack (Male Threaded) [A2K-SCREWCAP-10-M]

Protective Screw Cover f/NMEA2000 Female Micro Connectors - 10-Pack (Male Threaded)Screw-cap covers for NMEA 2000 female micro connectors.This product may not be returned to the original point of purchase. Please...

Vendor:

Actisense N2K Micro Gender Changer - Female to Female - .25M [A2K-GCF-0M25]

N2K Micro Gender Changer - Female to Female - .25MUse between two cable connectors of the same type and gender of connector on an NMEA 2000® backbone.Manufactured using Actisense designed...

Vendor:

Maretron Mini Termination Resistor - Female [TR-NF]

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and...

Vendor:

Ancor NMEA 2000 Inline Terminator [270114]

NMEA 2000 Inline TerminatorFor proper termination of a network in a single piece, space saving design. The inline terminator connects between a backbone cable and a drop cable, while still...