Sailing - Rigging

Vendor:

Barton Marine Carbon Fiber Tiller Extension - 1M [43504]

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional...

Vendor:

Barton Marine Stanchion Bullseye [60142]

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening....

Vendor:

C. Sherman Johnson Rigging Toggle - 5/16" Pin [12-121]

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging...

Vendor:

Barton Marine Alu Foam Soft Grip Tiller Extension - 700mm [43202]

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized...

Vendor:

C. Sherman Johnson Rigging Toggle - 1/4" Pin [12-120]

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging...

Vendor:

Barton Marine Alu Foam Soft Grip Tiller Extension - 800mm [43203]

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized...

Vendor:

C. Sherman Johnson Double Jaw Rigging Toggle - 1/4" Pin [12-320]

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins....

Vendor:

Barton Marine High Load Eye 16mm Bore [60452]

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed...

Vendor:

Barton Marine High Load Eye 22mm Bore [60453]

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed...

Vendor:

Barton Marine Size 5 Vang Tackle 4:1 [05900]

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats...

Vendor:

Barton Marine Genoa Slide w/Loop f/32mm Track [32301]

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of...

Vendor:

Harken 13mm High-Load Trolley w/2X M4 Tapped Holes [IN6707.HL]

13mm High-Load Trolley with 2X M4 Tapped HolesThis trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment,...

Vendor:

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Vendor:

C. Sherman Johnson Tubular Turnbuckle w/Splice Eye [LS-2900]

Tubular Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings....

Vendor:

C. Sherman Johnson Short Adjuster f/1/8" Wire [26-406]

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj....

Vendor:

C. Sherman Johnson Deck Toggle Turnbuckle "T" Style f/1/8" Wire [26-412-1T]

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 1/8" Wire 1/4"-28 3" adj.

Vendor:

C. Sherman Johnson Splice Line Large Boat Kit f/Boats up to 40 [SLK-40]

Splice Line Large Boat Kit for Boats up to 40'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings....

Vendor:

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/3/16" Wire [27-408]

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/1/8" Wire [26-408]

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Open Body Turnbuckle w/Splice Eye [LS-5200]

Open Body Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line...

Vendor:

C. Sherman Johnson Interlocking Swivel Gate Eye f/1/8" Wire [26-410]

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Vendor:

C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire [26-415-1T]

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Vendor:

C. Sherman Johnson Single Swivel Gate Eye f/1/8" Wire [26-409]

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.