accessories

Vendor:

Vesper External Weatherproof Single Speaker f/Cortex M1 [010-13267-00]

External Weatherproof Single Speaker for Cortex M1 Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in...

Vendor:

Vesper GA 38 GPS/GLONASS Antenna f/Cortex V1 M1 [010-13305-00]

GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in...

Vendor:

Vesper Power Cable f/Cortex - 6 [010-13273-00]

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Vendor:

Vesper Protective Cover f/Vision AIS Displays [010-13275-00]

Protective Cover for Vision AIS DisplaysProtective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light...

Vendor:

Vesper Splitter Patch 2M Cable f/Cortex M1 to External VHF [010-13269-00]

Splitter Patch 2M Cable for Cortex M1 to External VHF2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1. Specifications: Type:...

Vendor:

Vesper Waterproof USB Cable - 5M (16) [010-13276-00]

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket...

Vendor:

VETUS Adapter Plate to Replace BPS/BPJ Panels w/BPSE/BPJE Panels [BPA]

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas...

Vendor:

VETUS CAN Terminating Resistor V2 [CANVT]

CAN Terminating Resistor V2The VETUS CAN Terminating Resistor V2 provides durable marine-grade construction and design, for use in terminating one end of your CAN Bus Network.

Vendor:

VETUS Gasket Seal Set f/Helm Pumps MT30-MT140 [HS37N]

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42...

Vendor:

VETUS O-Ring Cover f/Waterfilter 1320 [FTR13201]

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Vendor:

VETUS O-Ring Set f/Waterfilter 1320 - 5-Pack [FTR13202]

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

Vendor:

VETUS Replacement O-Rings Set - 5-Pack [FTR3302]

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Vendor:

VETUS Set O-Ring Cover f/Waterfilter 330 [FTR3301]

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note:...

Vendor:

VETUS Set of Shear Pins f/Bow Thruster 45 50kgf - 5-Pack [BP65S]

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.

Vendor:

VETUS Strainer f/Type FTR140 [FTR41]

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Vendor:

Vexilar A.C.E. Transducer Epoxy [ACE001]

A.C.E. Transducer EpoxyThe perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull is perfect...

Vendor:

Vexilar Glo-Ring [VGR001]

Glo-RingUsing special UV LED’s anglers are able to glow a lure treated with glow paint with only one second of exposure inside the powerful GLO-RING light chamber.  Powered by your...

Vendor:

Vexilar Mag-Shield f/FL-8SE FL-18 Series [MS0001]

Mag-Shield for FL-8SE & FL-18 SeriesThe Mag Shield is a magnifying lens that doubles as a face shield. It easily fits onto the face of any of the FL-8s or...

Vendor:

Vexilar Neoprene Screen Cover f/Flat Screen Flashers [COV001]

Neoprene Screen Cover for Flat Screen FlashersFlasher Cover Neoprene cover will protect the flasher face during transport and storage. Fits models FL-12, FL-20 & FL-22HD.Features:Waterproof Bottom Helps Protect the ContentsWARNING:...

Vendor:

Vexilar Power Cord Adapter f/FL-12 FL-20 Flashers - 12 VDC - 6 [PCDCA4]

Power Cord Adapter for FL-12 & FL-20 Flashers - 12 VDC - 6'Power Cord DC Adaptor for FL-12's, FL-20's, FL-22HD & FLX-28 12 Volt Power Cable plugs into any standard...

Vendor:

Vexilar Power Cord Adapter f/FL-8 FL-18 Flasher - 12 VDC - 6 [PCDCA1]

Power Cord Adapter f/FL-8 & FL-18 Flasher - 12 VDC - 6'Power Cord DC Adaptor for FL-8's and FL-18's 12 Volt Power Cable plugs into any standard cigarette lighter socket...

Vendor:

Vexilar Power Cord f/FL-12 FL-20 Flashers [PC0004]

Power Cord for FL-12 & FL-20 FlashersPower Cord Fits all FL-12 and FL-20 Flashers. Features: Power Cord for FL 12 & FL 20 Flashers High Quality Material WARNING: This product can...

Vendor:

Vexilar Power Cord f/FL-18 FL-8 Flashers [PC0001]

Power Cord for FL-18 & FL-8 FlashersPower Cord Fits all FL-8 and FL-18 Flashers.WARNING: This product can expose you to chemicals which are known to the State of California to...

Vendor:

Vexilar Pro Mount Base Only [SMB001]

Pro Mount Base OnlyFor years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS...