rigging

Vendor:

C. Sherman Johnson Over Center Snap Gate Hook f/1/8" Wire [26-884]

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a...

Vendor:

C. Sherman Johnson Pulpit Anchor f/1" Rail [29-501]

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole...

Vendor:

C. Sherman Johnson Quick Release Lever - 1/4" Pin [14-205]

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is...

Vendor:

C. Sherman Johnson Quick Release Lever - 5/16" Pin [14-206]

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is...

Vendor:

C. Sherman Johnson Quick Release Shroud Adjuster - 1/4" Pin [15-212]

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications: Pin-to-pin adjustment: 1-3/4″ to 3-5/8″ Safe...

Vendor:

C. Sherman Johnson Rigging Toggle - 1/4" Pin [12-120]

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging...

Vendor:

C. Sherman Johnson Rigging Toggle - 3/8" Pin [12-122]

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging...

Vendor:

C. Sherman Johnson Rigging Toggle - 5/16" Pin [12-121]

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging...

Vendor:

C. Sherman Johnson Safe Lock Gate Hook T-316 [27-404]

Safe Lock Gate Hook T-316Features: Stainless, safe, inexpensive design Practical Sailor called a "well-engineered hunk of metal"  Adjusts in place with knurled nut Stamped metal construction 3/4 in. long from...

Vendor:

C. Sherman Johnson Shore Adjuster f/3/16" Wire [27-406]

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj....

Vendor:

C. Sherman Johnson Short Adjuster f/1/8" Wire [26-406]

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj....

Vendor:

C. Sherman Johnson Single Swivel Gate Eye f/1/8" Wire [26-409]

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Vendor:

C. Sherman Johnson Single Swivel Gate Eye f/3/16" Wire [27-409]

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Vendor:

C. Sherman Johnson Single Threaded Gate Eye f/1/8" Wire [26-407]

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Single Threaded Gate Eye f/3/16" Wire [27-407]

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Snap Gate Hook - Body Only - 1/4" - 28 Left Hand [21-81]

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end...

Vendor:

C. Sherman Johnson Snap Gate Hook - Body Only - 5/16" - 24 Left Hand [21-80]

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end...

Vendor:

C. Sherman Johnson Snap Gate Hook - Body Only - 5/16" - 24 Right Hand [21-80-1]

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end...

Vendor:

C. Sherman Johnson Splice Eye to Splice Eye Fitting [LS-3200]

Splice Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line...

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud 5/16" -24 x 2-1/2" RH w/Splice Eye [20-64]

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud: 1/4" -28 x 2-1/2" RH w/Splice Eye [20-62]

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud: 5/16" -24 x 2-1/2" LH w/Splice Eye [20-63]

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threded Stud: 1/4"-28 x 2-1/2" LH w/Splice Eye [20-61]

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Line Gate Kit - Aft f/One Side [SLK-GKA]

Splice Line Gate Kit - Aft for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The...