Boat Outfitting - Fuel Systems

Vendor:

Standard Horizon Gimbal Mount Bracket f/GX6000 - Black [RA6060600]

Gimbal Mount Bracket for GX6000 - BlackStandard Horizon's gimbal mount bracket specifically for the GX6000.Features: Color: Black Specifically for the GX6000 Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 4"W...

Vendor:

Standard Horizon Replacement Power Cord f/GX6000 [T9027407]

Replacement Power Cord for GX6000Standard Horizon's replacement power cord specifically for the GX6000. Specifications: Type: Cables Box Dimensions: 2"H x 2"W x 5"L WT: 0.15 lbs

Vendor:

Raymarine Suncover for Axiom 12 [R70533]

Suncover for Axiom 12 Suncover for the Raymarine Axiom 12 when bracket mounted. Not for Axiom 12 Pro. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 13"L WT: 0.4...

Vendor:

BoatLIFE Life-Calk Solvent Cleaner - 16oz [1056]

Life-Calk Solvent & Cleaner - 16ozCleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or Teak Deck Sealant. Safe for fiberglass. Removes uncured polysulfide sealant and grease from tools...

Vendor:

BoatLIFE Teak Brite Advanced Formula Teak Oil - 32oz [1188]

Teak Brite® Advanced Formula Teak Oil - 32ozMost advanced teak oil and sealer available. Will deliver long lasting protection even in tropical climates. Penetrates deep into wood (dry wood only)...

Vendor:

BoatLIFE Teak Brite Powder Cleaner - Jumbo - 64oz [1185]

Teak Brite® Powder Cleaner - Jumbo - 64ozOne-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready...

Vendor:

C. Sherman Johnson Spreader Flag Halyard Kit [40-530]

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Vendor:

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Vendor:

C Sherman Johnson Eye to Jaw Fitting [LS-2500]

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Vendor:

C. Sherman Johnson Shore Adjuster f/3/16" Wire [27-406]

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj....

Vendor:

C. Sherman Johnson Short Adjuster f/1/8" Wire [26-406]

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj....

Vendor:

C. Sherman Johnson "T" Style Deck Toggle f/3/16" Wire [27-415-1T]

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Vendor:

C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire [26-415-1T]

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Vendor:

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/3/16" Wire [27-408]

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/1/8" Wire [26-408]

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Interlocking Swivel Gate Eye f/3/16" Wire [27-410]

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Vendor:

C. Sherman Johnson Interlocking Swivel Gate Eye f/1/8" Wire [26-410]

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Vendor:

C. Sherman Johnson Single Threaded Gate Eye f/3/16" Wire [27-407]

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Single Threaded Gate Eye f/1/8" Wire [26-407]

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Vendor:

C. Sherman Johnson Single Swivel Gate Eye f/3/16" Wire [27-409]

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Vendor:

C. Sherman Johnson Single Swivel Gate Eye f/1/8" Wire [26-409]

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Vendor:

C. Sherman Johnson Deck Toggle Turnbuckle to Hand Crimp Terminal f/3/16" Wire [27-412-1T]

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 3/16" Wire 1/4"-28 3" adj.

Vendor:

C. Sherman Johnson Deck Toggle Turnbuckle "T" Style f/1/8" Wire [26-412-1T]

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 1/8" Wire 1/4"-28 3" adj.

Vendor:

C. Sherman Johnson Open Body Jaw to Swage Turnbuckle f/1/8" Wire [26-314]

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1/8" Wire 1/4" Pin 3" adj.