Boat Outfitting - Fuel Systems

Vendor:

C. Sherman Johnson Snap Gate Hook - Body Only - 1/4" - 28 Left Hand [21-81]

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end...

Vendor:

C. Sherman Johnson Snap Gate Hook - Body Only - 5/16" - 24 Left Hand [21-80]

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end...

Vendor:

C. Sherman Johnson Over Center Snap Gate Hook f/1/8" Wire [26-884]

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a...

Vendor:

C. Sherman Johnson Splice Line Gate Kit - Midship f/One Side [SLK-GKM]

Splice Line Gate Kit - Midship for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The...

Vendor:

C. Sherman Johnson Splice Line Large Boat Kit f/Boats up to 40 [SLK-40]

Splice Line Large Boat Kit for Boats up to 40'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings....

Vendor:

C. Sherman Johnson Splice Line Small Boat Kit f/Boats up to 30 [SLK-30]

Splice Line Small Boat Kit for Boats up to 30'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings....

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud 5/16" -24 x 2-1/2" RH w/Splice Eye [20-64]

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud: 5/16" -24 x 2-1/2" LH w/Splice Eye [20-63]

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threaded Stud: 1/4" -28 x 2-1/2" RH w/Splice Eye [20-62]

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Splice Eye w/Threded Stud: 1/4"-28 x 2-1/2" LH w/Splice Eye [20-61]

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to...

Vendor:

C. Sherman Johnson Adjuster w/Splice Eye [LS-3400]

Adjuster with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The...

Vendor:

C. Sherman Johnson Splice Eye to Splice Eye Fitting [LS-3200]

Splice Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line...

Vendor:

C. Sherman Johnson Over Center Gate Hook w/Splice Eye [LS-3100]

Over Center Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Vendor:

C. Sherman Johnson Tubular Turnbuckle w/Splice Eye [LS-2900]

Tubular Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings....

Vendor:

Sea-Dog Stainless Steel T-Hinge - 4" [205705-1]

Stainless Steel T-Hinge - 4"A T-Hinge is a hybrid combination between a butt and strap hinge. The horizontal part of the T goes on the frame, while the vertical part...

Vendor:

Sea-Dog Stainless Steel Bow Eye - 3/8" x 4-1/4" [080036-1]

Stainless Steel Bow Eye - 3/8" x 4-1/4"These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion...

Vendor:

Sea-Dog Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight [353210-1]

Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - StraightThe Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during...

Vendor:

Sea-Dog Stainless Steel Skene Chocks - 4-1/2" [060060-1]

Stainless Steel Skene Chocks - 4-1/2"These Skene Chocks provide a smooth lead for your mooring or dock lines minimizing chafing. The tips of these chocks are designed to overlap, preventing...

Vendor:

Sea-Dog Stainless Steel Open Base Cleat - 8" [041608-1]

Stainless Steel Open Base Cleat - 8"The Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Constructed of corrosion resistant investment cast 316 stainless steel....

Vendor:

Scanstrut APT-F-250-01 Aluminum PowerTower Radar Mount - 10" Forward Leaning [APT-F-250-01]

APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium,...

Vendor:

Blue Sea 3126 SMS Enclosure Large Cable Gland PG29 - #6 Cable [3126]

3126 SMS Enclosure Large Cable Gland PG29 - #6 CableFeatures: Accepts Cable #6 (4 Conductor)  Large Cable Gland Specifications: Type: Deck Seal Box Dimensions: 2"H x 3"W x 5"L WT:...

Vendor:

Mastervolt ChargeMaster Plus 24V, 60A, 3-Bank, NMEA2000 - CZone [44320605]

ChargeMaster Plus 24V, 60A, 3-Bank, NMEA2000 - CZoneChargeMaster Plus 24/60-3 CZoneAll-in-one solution for faster and safer chargingChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into...

Vendor:

Standard Horizon Charge Cradle f/HX40 [SBH-27]

Charge Cradle for HX40Single charging cradle for Standard's HX40 Handheld Radio.*Requires power cable sold separately Specifications: Type: Chargers Box Dimensions: 2"H x 3"W x 3"L WT: 0.15 lbs