Hardware

Vendor:

ANDERSEN Large Bailer - Outside Mount [RA554136]

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and...

Vendor:

ANDERSEN Mini Bailer - Outside Mount [RA554130]

Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and...

Vendor:

ANDERSEN Super Max Bailer - Inside Mount [RA554133]

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective...

Vendor:

ANDERSEN Super Medium Bailer - Inside Mount [RA554132]

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective...

Vendor:

ANDERSEN Super Mini Bailer - Inside Mount [RA554131]

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective...

Vendor:

Barton 'K' Cam Mini [70100]

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon...

Vendor:

Barton 25mm T-Track Genoa Car [25100GT]

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our...

Vendor:

Barton 4mm Rope Stoppers - Black - Pair [42812]

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At...

Vendor:

Barton 7mm Dyneema Loop w/High Load Eye - 22mm Bore [60461]

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including...

Vendor:

Barton Deck Eye - Stainless Steel - 14mm [60410]

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings

Vendor:

Barton Deck Organizer Size 1 - 3 Sheave [81583]

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a...

Vendor:

Barton Deck Plate w/Fixing Eye w/Blanking Plug - M12 Eye [60362]

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring...

Vendor:

Barton Deck Plate w/Fixing Eye w/Blanking Plug - M8 Eye [60360]

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring...

Vendor:

Barton High Load Eye 6mm Bore [60449]

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board,...

Vendor:

Barton Low Friction Ring Strap Eye - Stainless Steel [60415]

Low Friction Ring Strap Eye - Stainless SteelFor the concerning dinghy sailor. Barton has offered stainless steel deck eyes for a long while, but as performance on boats improves, the...

Vendor:

Barton Marine 165mm Sliding Cleat - Fits 25mm T Track [51253]

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a...

Vendor:

Barton Marine 35mm Diameter Plain Bearing Sheave [64804]

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh...

Vendor:

Barton Marine 58mm Diameter Ball Bearing Rope Sheave [64913]

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the...

Vendor:

Barton Marine 64mm Diameter Ball Bearing Rope Sheave [64914]

64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the...

Vendor:

Barton Marine Deck Organizer - Size 1 - 6 Sheave [81586]

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the...

Vendor:

Barton Marine Deck Organizer - Size 2 - 2 Sheave - Black [81682B]

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from...

Vendor:

Barton Marine DO 550 Rope Clutch - Base Plate [81547]

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 3"W x...

Vendor:

Barton Marine DO 550 Rope Clutch - Cam [81546]

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 2"W x 5"L WT:...

Vendor:

Barton Marine DO 550 Rope Clutch - Double [81501]

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts...